CPM/CPM-1 centrifugal pump
INTRODUCTION
CPM/CPM-1 series are single stage centrifugal pumps, suitable for both domestic and industrial aplications to convey dean liquids and non-aggressive chemical fluids. The hydraulic characteristic is with higher head and smaller capacity.
WORKING CONDITIONS
Max temperature of fluid up to +80℃.
Max pressure: 10 bar.
Max ambient temperature up to 40℃.
STANDARD DATA AND EQUIPMENT
Single phase 220V/50Hz,brass or plastic impeller, carbon steel motor shaft, with thermal protector inside.Other model and material such as three phase, 110V, 60Hz,dual voltage, stainless shaft, etc will be available upon request.
PRODUCT STRUCTURE
No. | Description | No. | Description | No. | Description |
1 | Pump Body | 11 | Screw | 21 | Motor End Cover |
2 | Copper Screw | 12 | Ball Bearing | 22 | Tie Bolt |
3 | Fit Plug Screw | 13 | Motor Rotor | 23 | Fan |
4 | Locking Nut | 14 | Shaft Key | 24 | Fan Cover |
5 | Impeller | 15 | Motor Body | 25 | Terminal Cover |
6 | O Ring | 16 | Stator | 26 | Terminal Block |
7 | Mechanical Seal | 17 | Stator Coil | 27 | Capacitor |
8 | Mechanical Seal | 18 | Motor Foot | 28 | Connection Wire |
9 | Motor Front Cover | 19 | Spring Washer | 29 | Screw |
TECHNICAL DATA
Model | Power | H.max (m) | Q.max (L/min) | Size (Inch) | S.Head (m) | |
Kw | HP | |||||
CPM130-1 | 0.37 | 0.5 | 20 | 80 | 1"x1" | 8 |
CPM146-1 | 0.55 | 0.75 | 26 | 110 | 1"x1" | 8 |
CPM158-1 | 0.75 | 1 | 30 | 118 | 1"x1" | 8 |
CPM 130 | 0.37 | 0.5 | 20 | 80 | 1"x1" | 8 |
CPM146 | 0.55 | 0.75 | 26 | 110 | 1"x1" | 8 |
CPM 158 | 0.75 | 1 | 30 | 118 | 1"x1" | 8 |
CPM170 | 1.1 | 1.5 | 35 | 128 | 1.25"x1" | 8 |
CPM190 | 1.5 | 2 | 40 | 128 | 1.25"x1" | 8 |
CPM 200 | 2.2 | 3 | 44 | 140 | 1.25"x1" | 8 |
Category
Related products

National toll-free: 400-186-3888
Add: Xiacheng Mechanical Industrial Zone,Wugen Town,Wenling City, Zhejiang, China.
Sales hotline: 86-576-86906852
Fax: 86-576-86906851
E-mail: info@lastonweld.com
LASTON
Copyright © Zhejiang Laoshidun Technology Co.,Ltd. All Rights Reserved.